77 / 100
LST244FX

RS232/485/422 to 10/100M TCP/IP Fiber Converter

LST244FX is a industrial grade serial RS232/422/458 to 10/100M TCP/IP fiber converter, which enables serial device to be direct connected in TCP/IP fiber network. With its software the device can be found easily in the network. Configuration can be easily done via web management.

  • RS232/422/485 serial to 10/100M TCP/IP fiber conversion
  • 1x 10/100M Simplex SC (1310/1550nm)
  • Support full duplex low cost reliable servers
  • Support TCP server / clients, UDP mode
  • Built in web server, easy configuration via web browser
  • Support Baud from 1200-460800
  • Support virtual port, web management or Vircom configurations
  • 2kV surge protection on RJ45 port

 

Parameters Values
Fiber Port
1x 10/100Mbps Simplex SC (Tx/Rx: 1310/1550nm or 1550/1310nm)
Surge protection
2KV electromagnetic isolation
Serial interface
RS232/422/485
No. of port
1x serial DB9 for RS232, 2x 2 PIN terminal for RS422/485
Parity bits
None, even, odd, space, mark
Data bits
5~9
Stop parity bit
1, 2
Flow control
RTS/CTS, DTR/DCR, Xon/Xoff
Data rate
1200bps~115200bps
Protocol
TCP, HTTP, UDP, ICMP, ARP, IP, DNS, DHCP
Virtual serial platform
Window 98/2000/XP/Win7/Win8
Configuration
Web, Vircom, serial type AT command
Power supply
DC9~24V, 400mA
Dimension
94 x 65 x 25mm
Working temperature
-45 ~ +85°C
Storage temperature
-45 ~ +85°C
Humidity
5 ~ 95% RH

Related Products

Copyright © 2020 Lightem Systems. All rights reserved