10 ports Layer 2 Data Center Switch with 8x 1G RJ45 & 2x 10G SFP+ ports: LTG10-2SFP+

Lightem LTG10-2SFP+ 10 Gigabit data center switch. It provides 8x 1G RJ45 ports & 2x 10G SFP+ optical ports. With high bandwidth and low latency, pipe network. It located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, or gathering.

 

  • 200G backplane bandwidth
  • 8x 1G RJ45 & 2x 10G SFP+ ports, the highest density (1U TOR), meet the demand of high-density 10G server access
  • Hardware routing, the packet forwarding rate of the wire speed layer 3 switching has reached 148.8Mpps, L2 / L3 full speed forwarding
  • Management support with Web,SNMP and Telnet
  • Support XModem protocol,use TFTP/ZMODEM to software upgrading and BootRom upgrading
  • Support SFP+, also backwards compatible XFP
  • Support 10G Base-T,be compatible with 1000M/100M Base-T.Max forwarding distance can reach 100M with Cat6
  •  

Parameters Values
Fixed Port
24x 10G SFP+ optical ports, 1x 10/100/1000M RJ45 adaptive electrical ports
Console Part
1
Backplane bandwidth
484 Gbps
Packet forwarding rate
360.092 Mpps
Jumbo frames
12k bytes
Transfer Mode
Support store-forward mode and cut-through mode
IPv4/IPv6 Route
512/256
Packet Buffer
4 mb
VLAN ID
4K
Flash memory capacity
32 mb
Memory capacity
256 mb
CPU
Single-Core 32-bit 600MHz MIPS
Physical Characteristics
Dimension
440x284x44mm
Power supply
AC 90V ~ 290V 50~60Hz, <100W
Operating temperature
0-50°C operation
Operating humidity
0-90% no condensation

Related Products

Copyright © 2020 Lightem Systems. All rights reserved