14 ports Layer 2 Data Center Switch with 12x 1/10G RJ45 & 2x 10G SFP+ ports: LTG14-2SFP+

Lightem LTG14-2SFP+ 10 Gigabit data center switch. It provides 12x 1/10G RJ45 ports & 2x 10G SFP+ optical ports. With high bandwidth and low latency, pipe network. It is located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, or gathering.

  • 280G backplane bandwidth
  • 12x 1/10G RJ45 & 2x 10G SFP+ ports, the highest density (1U TOR), meet the demand of high-density 10G server access
  • Hardware routing, the packet forwarding rate of the wire speed layer 3 switching has reached 267.84Mpps, L2 / L3 full speed forwarding
  • Management support with Web,SNMP and Telnet
  • Support XModem protocol,use TFTP/ZMODEM to software upgrading and BootRom upgrading
  • Support SFP+, also backwards compatible XFP
  • Support 10G Base-T,be compatible with 1000M/100M Base-T.Max forwarding distance can reach 100M with Cat6

Parameters Values
Number of RJ45 (1/10G)
12
Number of Optical ports (SFP+ 10G)
2
Console Part
1
Backplane bandwidth
280 Gbps
Packet forwarding rate
267.84Mbps
Jumbo frames
1522 byte
Transfer Mode
Support store-forward mode and cut-through mode
Packet Buffer
2 mb
Flash memory capacity
16 mb
Memory capacity
512M DDR3 SD Ram
CPU
600 MHz ARM Cortex-A9 single-core processor
Physical Characteristics
Dimension
440x284x44mm
Power supply
AC 90V ~ 290V 50~60Hz, <100W
Operating temperature
0-50°C operation
Operating humidity
0-90% no condensation

Related Products

Copyright © 2020 Lightem Systems. All rights reserved