46 / 100

10 ports Gigabit Ethernet Switch with 2x 10/100/1000M RJ45 and 8x GE SFP ports- LX10-8SFP

Lightem Systems LX10-8SFP Gigabit Ethernet Switch has two 10/100/1000M UTP ports and eight 1000M SFP sockets. Customer can choose different 1000M SFP module according as his demand, such as 1000Base-T, 1000Base-SX or 1000Base-LX etc. The product is possessed of stable performance, excellent quality and reasonable price with adopting latest IC from USA. It is applicable to use in constructing of Optical Fiber Ethernet.

 

  • 10-Port 10/100/1000 Mbps GbE Switch
  • Two 10/100/1000M UTP ports and Eight 1000M SFP ports
  • Auto negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
  • Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
  • The SFP slot supports 1000M and Full Duplex mode.
  • Supports IEEE 802.3x flow control and broadcast storm protection.
  • Supports VLAN and QoS.
  • Supports max 10K bytes frame.
  • It is low power consume (10W), low heat, and good reliability.

 

Parameters Values
Operating System
IEEE802.3/u/z/ab, 10/100/1000Base-T and 1000Base-SX/LX
MAC address table
1K
Frame buffer memory
1MKb
Switch fabric
20G
Connector
UTP:RJ-45, 10/100/1000Mbps ; SFP:1000Mbps
Cable
UTP: Cat.5e or 6 UTP (the max distance up to 100m)
Multimode Fiber: 50/125, 62.5/125µm (the max distance up to 224/550m)
Singlemode Fiber: 8/125, 8.7/125, 9/125µm(the max distance up to 10∼100 km)
Flow control
Full Duplex: IEEE802.3x flow control; Half Duplex: back pressure flow control
LED
SFP1, SFP2, PWR, Link/Act, TP1~TP4 Link/Act
Power
AC220V(100-240V), 50~60Hz; DC: 12V,2A0 ~ +50℃
Operating Temperature
0°C ~ 50°C
Storage Temperature
-20°C ~ 70°C
Humidity
5% ~ 90%
Dimensions (W x H x D)
30(H)×182(W)×101(L)mm

Related Products

Copyright © 2020 Lightem Systems. All rights reserved