6 Ports 10/100/1000M SMART Industrial switch with 4x 1G RJ45 & 2x 1G SFP - LIMOX6-2SFP

SMART Industrial switch Fiber Switch LIMOX6-2SFP is a 4x RJ45 port (10/100/1000M), 2x SFP ports (1000M) Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +85 °C). Its casing is IP40 rated and meet EMC industrial level 4 requirements. These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

 

  • L2+ features provide better manageability, security, QoS, and performance.
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W).
  • Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)

 

Parameters Values
Number of RJ45 ports (10/100/1000BaseT)
4
Number of GE SFP ports
2
Console port
YES (RJ45-RS232)
Transmission Method
Store-And-Forward
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
128 Gbps
Forwarding Rate@64byte
8.93 Mbps
Packet Buffer Memory
4 mb
MAC Address Table
8k
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
Content
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightning and protection level
Lightning protection: 6KV 8/20us;Protection level: IP40
LED Indicators
Power Indicator : PWR (green); System Indicator :SYS (green);
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Operating Temperature
-40°C+80°C
Storage Temperature
-40°C+85°C
Operating Humidity
5% ~ 90% (no condensation)
Power Supply
DC 12-48V
Power Consumption
Standby<6W, Full load<8W
Reset switch
Yes,support one key to restore factory settings
Dimensions
145*134.5*47.5mm
Weight
0.8kg

Related Products

Copyright © 2020 Lightem Systems. All rights reserved