28 Ports 10/100/1000M SMART Industrial POE switch with 24x 1G RJ45 POE, 2x 1G SFP & 2x 1G RJ45/SFP Combo - LIMPOX28-2C-x

SMART Industrial POE switch Fiber Switch LIMPOX28-2C is a 24x RJ45 port 10/100/1000M POE, 2x 1G SFP and 2x 1G RJ45/SFP combo ports. Managed Industrial POE Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +75°C). These switches are specially designed for harsh industrial environments. It is suitable for wind power, subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.
Features
  • 24x RJ45port 10/100/1000M POE, 2x 1G SFP& 2x 1G RJ45/SFP Combo and 1 console port
  • L2+ features provide better manageability, security, QoS, and performance.
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W).
  • Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)
  • Dual AC220V & 1x DC48V Power Supplies
Specifications
Parameters Values
Number of RJ45 POE ports (10/100/1000BaseT)
24
Number of 1G RJ45/SFP Combo ports
2
Number of 1G SFP ports
2
Console port
YES (RJ45-RS232)
Transmission Method
Store-And-Forward
Network Protocols
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward (Full Wire Speed)
Switching Capacity
256 Gbps
Forwarding Rate@64byte
39 Mbps
Buffer Memory
8 mb
MAC Address Table
8k
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ;
100BASE-TX: Cat5e or later UTP(≤100 meter) ;
1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightning and protection level
Lightning protection: 6KV 8/20us;Protection level: IP40
POE standard
IEEE802.3af or IEEE802.3at
POE power
15.4W per POE port (IEEE802.3af); 30W per POE port (IEEE802.3at)
LED Indicators
Power Indicator : PWR (green); System Indicator :SYS (green);
Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Operating Temperature
-40°C+80°C
Storage Temperature
-40°C+85°C
Operating Humidity
5% ~ 90% (no condensation)
Power Supply
Dual AC220V & 1x DC48V Power Supplies
Power Consumption
Standby<18W, Full Load<380W
Reset switch
Yes,support one key to restore factory settings
Dimensions
400x 300x 45mm
Weight
4.5kg

Related Products

© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us