36 Ports 10/100/1000M SMART Industrial POE switch with 8x 10/100/1000M POE RJ45, 24x 1G SFP & 4x 10G SFP+

SMART Industrial switch Fiber Switch LIMPOX36-24SFP-4TG is a 8x 10/100/1000M POE RJ45, 24x 1G SFP& 4x 10G SFP+ Managed Industrial Switch with 1x console port. It consumes low power consumption, supports wide operating temperature (-40 to +75C). These switches are specially designed for harsh industrial environments. It is suitable for wind power,
subway PIS, power SCADA, sewage treatment, intelligent transportation systems applications.

 

  • 8x 10/100/1000M POE RJ45 ports, 24x 1G SFP, 4x 10G SFP+ and 1 console port
  • L2+ features provide better manageability, security, QoS, and performance.
  • L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping,
    LLDP, IP Source Guard, ARP inspection, ACLs etc.
  • Support spanning tree STP(802.1D) and RSTP(802.1W).
  • Jumbo frames support up to 9.6K kilobytes.
  • Support enhanced management through WEB, CLI, TELNET, SSH, SNMP and cable diagnosis
  • G.8032, ERPS Ethernet Ring Protection Switching (<50ms)

 

Parameters Values
Number of POE RJ45 ports (10/100/1000BaseT)
8
Number of 1G SFP ports
24
Number of 10G SFP+ ports
4
Console port
YES (RJ45-RS232)
Transmission Method
Store-And-Forward
Network Protocol and Standards
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x
Forwarding Mode
Store and Forward(Full Wire Speed)
Switching Capacity
598Gbps
Forwarding Rate @ 64byte
107Mpps
MAC
32K
Buffer Memory
32M
Twisted Pair Transmission
10BASE-T: Cat3,4,5 UTP(≤100 meter) ; 100BASE-TX: Cat5e or later UTP(≤100 meter) ; 1000BASE-T: Cat5e or later UTP(≤100 meter)
Lightening and protection level
6KV 8/20us;Protection level: IP40
POE standard
IEEE802.3af or IEEE802.3at
POE power
15.4W per POE port (IEEE802.3af); 30W per POE port (IEEE802.3at)
Operating temperature
-40 to 80°C
Storage temperature
-40 to 85 °C
Operating humidity
5 ~ 95% non condensation
Power Supply
Dual AC 100-240V (1+1)
Power Consumption
Standby<35W, Full Load<50W
LED
Power Indicator : PWR (green); System Indicator :SYS (green); Network Indicator: Link/ (yellow);SFP Indicator: L/A (green);
Reset switch
Yes,support one key to restore factory settings.
Dimensions
440*300*45mm
Weight
4.8kg

Related Products

Copyright © 2020 Lightem Systems. All rights reserved