82 / 100

3 Ports 10/100M Industrial POE Switch with 2x POE RJ45 and 1x FX - LIPOF3-1FX

Lightem systems LIPOF3-1FX is a 2x 10/100M POE RJ45 port and 1x FX port Industrial POE switch. Its casing is IP40 rated and meet EMC industrial level 4 requirements. Features 3KV network port surge protection which is important for harsh outdoor environment and ensure the reliability of the uninterrupted system.

 

  • 2x 10/100M POE RJ45 + 1x 10/100M FX Duplex SC
  • Supports IEEE 802.3af (15.4W per port) and 802.3at (30W per port)
  • Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
  • RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX
  • MAC address table of the PoE Switch with auto-learning and auto-aging
  • Supports full-duplex and half-duplex auto-negotiation
  • LED indicators for monitoring power, link, activity and POE status
  • Support Din Rail Mount
  • IP40 protection

 

Parameters Values
Number of POE RJ45 ports (10/100BaseT)
2
Number of Fiber ports (100M FX)
1
Power Pin Assignment
1/2and 3/6 , or alternatively over 4/5(+) and 7/8 (-)
Performance Specifications
Transmission Method
Store-And-Forward
Network Protocol and Standards
IEEE 802.3u
IEEE 802.3x Flow Control
POE standard
IEEE802.3af or IEEE802.3at
POE power
15.4W per POE port (IEEE802.3af) 30W per POE port (IEEE802.3at)
Environmental
Operating temperature
-40 ~ 80°C
Storage temperature
-40 ~ 85°C
Operating humidity
5 ~ 95% non condensation
Power Supply
DC 48-57V
Power Consumption
Standby:<4W;Full load:<60W
LED indicators
Power supply, network status and activity
Physical
Dimension
119 x 100 x 30mm
Weight
0.4kg

Related Products

Copyright © 2020 Lightem Systems. All rights reserved