Telecom & Datacom

Muxponder

8x 1G SFP & 1x10G XFP Muxponder Card, 10G OTN Muxponder With 16x SFP & 2x XFP Ports, 100G OTN Muxponder With 10x SFP+ & 1x CFP Ports, 8-Slot Management Rack

 

muxponder
  1. Home »
  2. Telecom/Datacom »
  3. Active Conversion & Multiplexing »
  4. Muxponder »
Previous
Next

8x 1G SFP & 1x10G XFP Muxponder card - L8P1GM10G2

L8P1GM10G2 incorporates 8 SFP-based access interfaces that can accommodate various types of SFP. The trunk port is an XFP 10Gbps permitting flexible connectivity options between the muxponders either in a WDM system or directly between two modules. As well as provide double XFP interfaces, which can Achieve 1 +1 protective，Enhance the security of the system.

 

Download Catalog
Features
  • 10 Gbps trunk port rate
  • It provides 8 standard SFP slots and 1 XFP slot;
  • The trunk port can provide double XFP interfaces, which can Achieve
  • 1 +1 protective enhance the security of the system
  • 8 GE ports at the client side are isolated from each other;
  • Point-to-Point interconnection of up to 8 LANs
  • 8 Independent 1GE services over one DWDM wavelength
  • It supports loopback setting of the client side and the line side;
  • Advanced network management features: support for SNMP-based network management, while supporting CLI,
    WEB, TELNET and other network management approach, Full graphical management
  • L8P1GM10G2 chassis compatibility
  • L01R01C – 1 slot powered chassis
  • L25R08C – 8 slots powered chassis
  • L06R16C – 16 slots powered chassis
Specifications
Parameters Values
Center wavelength
Compliance with ITU-I standard
Data Rate (Gbps)
Client Side: 100M/1000BaseFX, 100/1000BaseTX
Line Side:10.3Gbps
Optical interface type
Client Side:8 x SFP
Line Side:1 x XFP
NMS
TELNET, SNMP, WEB
Size OTU Module
26.5(W)× 195(D)x252(H)
1-slot chassis
482.6(W)x350(D)x43.6(H)
8-slot chassis
482.6(W)x360(D)x109(H)
16-slot chassis
482.6(W)x360(D)x261.6(H)
Environment Operating Temperature
-10°C ~ 60°C
Storage Temperature
-40°C ~ 80°C
Relative humidity
5% ~ 95% Non-condensing
Previous
Next

10G OTN Muxponder with 16x SFP & 2x XFP ports - L16LOTN-D10G

L16LOTN-D10G is high density 1U 10G OTN muxponder with 2x 10G and 16x Multirate SFP. Based on the ASIC IC, it is fully compliant with ITU-T standard, such as G.709, G.798, etc. L16LOTN-D10G is suitable for Metro Access and Metro Aggregation optical transport network.

 

Download Catalog
Features
  • 2x 10G XFP based OTU2 ports
  • 16x SFP Multirate (GE/FE, STM-1/4/16, OC-3/12/48)
  • Standalone 1U 19″ Unit
Specifications
Parameters Values
System Side Signal and Multiplexing Structure
10G port (WDM XFP): OCh OTU2 ODU2 ODU0 oOr DU1 or mixed ODU0/ODU1
10G port (WDM XFP): OCh OTU2 ODU2 ODU0 oOr DU1 or mixed ODU0/ODU1
Client Side Signal and Mapping Mode
FE/GE (via TTT+GMP) ODU0
STM-1/STM-4/OC-3/OC-12 (via GMP) ODU0
STM-16/OC-48 (via AMP or BMP) ODU1
FEC on 10G Port
Regular FEC (G.709); I.4 Super FEC (G.975.1); I.7 Super FEC (G.975.1)
In-band DCN Management
GCC0 on OTU2; IGCC1 or GCC2 or GCC1+2 on ODU2; GCC1 or GCC2 or GCC1+2 on ODU1; GCC1 or GCC2 or GCC1+2 on ODU0
Out-band DCN Management
Management Ethernet port
Transmission Protection
SNC/N; SNC/I
Network Management System
SNMP based NMS
Shelf Type and Dimensions(mm) (W*D*H)
440mm*435mm*44mm
Power Supply
AC：Input 100∼240V，47∼63Hz； DC：Input -40.5V∼-72V
Power consumption
90W
Storage temperature
-40°C∼70°C
Relative humidity
10%∼90%, no condensing
Previous
Next

100G OTN Muxponder with 10x SFP+ & 1x CFP ports - L10HOTN-100G

L10HOTN-100G is high density 1U 100G OTN muxponder with 10x 10G and 1x 100G ports. Based on the ASIC IC, it is fully compliant with ITU-T standard, such as G.709, G.798, etc. L10HOTN-100G is suitable for Metro Access and Metro Aggregation optical transport network.

 

Download Catalog
Features
  • 10x 10G SFP+ based ports (10GE LAN/WAN, STM-64/OC-192, FC8G, OTU2, OTU2e)
  • 1x 10G CFP based port (coherent CFP, 4x25G DWDM CFP, grey CP)
  • Standalone 1U 19″ Unit
Specifications
Parameters Values
System Side Signal and Multiplexing Structure
10G port (WDM XFP): OCh OTU2 ODU2 ODU0 or DU1 or mixed ODU0/ODU1
10G port (WDM XFP): OCh OTU2 ODU2 ODU0 or DU1 or mixed ODU0/ODU1
Client Side Signal and Mapping Mode
FE/GE (via TTT+GMP) ODU0
STM-1/STM-4/OC-3/OC-12 (via GMP) ODU0
STM-16/OC-48 (via AMP or BMP) ODU1
FEC on 10G Port
Regular FEC (G.709); I.4 Super FEC (G.975.1); I.7 Super FEC (G.975.1)
In-band DCN Management
GCC0 on OTU2; IGCC1 or GCC2 or GCC1+2 on ODU2; GCC1 or GCC2 or GCC1+2 on ODU1; GCC1 or GCC2 or GCC1+2 on ODU0
Out-band DCN Management
Management Ethernet port
Transmission Protection
SNC/N; SNC/I
Network Management System
SNMP based NMS
Shelf Type and Dimensions(mm) (W*D*H)
440mm*435mm*44mm
Power Supply
AC：Input 100∼240V，47∼63Hz； DC：Input -40.5V∼-72V
Power consumption
130W
Storage temperature
-40°C∼70°C
Relative humidity
10%∼90%, no condensing
L01R01C

L01R01C 1U Management Rack

L01R01C is a new generation of high-capacity transmission platform, suitable for dry country, provincial dry, metro core and other network levels to meet the TBit capacity requirements, the industry’s most cost-effective transmission application platform for IDC, ISP operators to build large Granular WDM delivery solution

 

Download Catalog
Features
  • Support 10G/100G Mixed transmission.
  • 1U Compact Rack
  • High density MUX Single Board , Support 48CH.
  • High density ODUK Single Board Support 8* SFP+
  • L8P1GM10G2 chassis compatibility
  • L01R01C – 1 slot powered chassis
  • L25R08C – 8 slots powered chassis
  • L06R16C – 16 slots powered chassis
  • Built in management port
Specifications
Parameters Values
Size
1U 19”
Slots
1 Slot
Capacity
Single Rack Support 7*16ch Wavelength MUX & DEMUX
Single Rack Support 56*10G Service regeneration , re-timing, and wavelength conversion
Power Supply
(Standard)2*DC-48V ，(Optional)2*AC 220V，Achieve 4*power supply Protection
Fan
2 *FAN Design High Performance ,High speed and Ensure sufficient heat
Work Temperature
-10℃ ~ 60℃
Storage Temperature
-40℃ ~ 80℃
Humidity
5% ~ 95% (Non-condensing)
Dimension
482.5(L) × 360(W) × 28(H)(mm)
L25R08C

L25R08C 2.5U 8-Slot Management Rack

L25R08C is a new generation of high-capacity transmission platform, suitable for dry country, provincial dry, metro core and other network levels to meet the TBit capacity requirements, the industry’s most cost-effective transmission application platform for IDC, ISP operators to build large Granular WDM delivery solution.

 

Download Catalog
Features
  • Support 10G/100G Mixed transmission.
  • 2.5U Compact Rack ( 6U and 1U size in optional)
  • 8 Slots (7Service card +1pcs management card)
  • High density MUX Single Board , Support 48CH.
  • High density ODUK Single Board, support 8x SFP+
  • L8P1GM10G2 chassis compatibility
  • L01R01C – 1 slot powered chassis
  • L25R08C – 8 slot powered chassis
  • L06R16C – 16 slot powered chassis
Specifications
Parameters Values
Size
2.5U 19”
Slots
8 Slots :1pcs Management Card Slots, 7pcs Universal Service card Slots
Capacity
Single Rack Support 56*10G Service regeneration , re-timing, and wavelength conversion
Power Supply
(Standard)2*DC-48V, (Optional)2*AC 220V, Achieve 4*power supply Protection
Fan
4 *FAN Design High Performance ,High speed and Ensure sufficient heat
Work Temperature
-10℃ ~ 60℃
Storage Temperature
-40℃ ~ 80℃
Humidity
5% ~ 95% (Non-condensing)
Dimension
482.5（L）× 360（W）×110（H） (mm)
L06R16C-2.5U-8-Slot-Management-Rack

L06R16C 2.5U 8-Slot Management Rack

L06R16C is a new generation of high-capacity transmission platform, suitable for dry country, provincial dry, metro core and other network levels to meet the TBit capacity requirements, the industry’s most cost-effective transmission application platform for IDC, ISP operators to build large Granular WDM delivery solution.

 

Download Catalog
Features
  • Support 10G/100G Mixed transmission.
  • 16 Slots (15Service card +1pcs management card) ；
  • High density MUX Single Board , Support 48CH .
  • High density ODUK Single Board ，Support 8*SFP+
  • L8P1GM10G2 chassis compatibility
  • L01R01C – 1 slot powered chassis
  • L25R08C – 8 slots powered chassis
  • L06R16C – 16 slots powered chassis
Specifications
Parameters Values
Size
6U 19inch
Slots
16 Slots :1pcs Management Card Slots ，15pcs Universal Business Slots
Capacity
Single Rack Support 60CH 10G Service regeneration, re-timing, and wavelength conversion
Power Supply
(Standard)2*DC-48V, (Optional)2*AC 220V, Achieve 4*power supply Protection
Fan
4 *FAN Design High Performance, High speed and Ensure sufficient heat
Work Temperature
-10℃ ~ 60℃
Storage Temperature
-40℃ ~ 80℃
Humidity
5% ~ 95% (Non-condensing)
Dimension
482.5(L)× 360(W) ×267(H)(mm)
© 2024 LIGHTEM® Group All rights reserved

Site Map

Search

All the information contained in this website is provided for general information and reference purposes only, Lightem Systems Limited does not warrant or represent that the information provided in this website is complete and accurate, nor that the information is up to date. Lightem Systems Limited assumes no responsibility for the information contained in this website and disclaims any or all liability in respect of such information.

Contact Us
  • Tel : +852 - 2687 5815
  • Fax: +852 - 2687 5456
  • Email: [email protected]
  • Office Address: Rm 910-11, 9/F, Topsail Plaza, 11 On Sum Street, Shatin, N.T., H.K.