93 / 100

Telecom & Datacom

Fiber Media Converter

Ethernet is widely deployed over many applications, it is one of the most robust computer communication protocol used today. Fast and Gigabit Ethernet are the most popular protocols being used today, with the use of the fiber ethernet converter the computer communication network over long distance becomes realized.

 

fiber media converter
fiber-media-converter

2.5G Multirate SFP-SFP Converter - LX2-2SFP

Lightem LX2 series Fiber Converter has two SFP sockets. It can convert two optical digital signals of SFP modules, which have same speed, among different wavelength, different distance and different mode (singlemode/multimode, UTP/Fiber). It is popular application in all kind of optical digital signals, like Ethernet signals, ATM signals, SDH signals, and control signals etc.

  • Conversion of optical signals can be carried out between multi/multimode optical fiber, between single/multimode fibers, or between single/single mode fibers when the both SFP modules have same speed.
  • Supporting conversion of 100Mbps~2.5Gbps optical digital signals transparently.
  • Conversion speed fast, less delay, high efficiency
  • Interfaces: SFP sockets.
  • Transmission Rate: Multi rate up to 2.5Gbps
  • Power : External or Internal switching power: AC100~240V/DC5V
  • LED Lights: Power: status of power supply, FX1 Link, FX2 Link: SFP connection indicator, for machine control and trouble adjusting.

Parameters Values
Interfaces
SFP
Transmission Rate
Multi rate up to 2.5Gbps
Power
AC100-240V, DC5V External Power Supply
LED Lights Power
Status of power supply
FX1 Link, FX2 Link
SFP connection indicator, for machine control and trouble adjusting.
Operating temperature
0 ~ +55°C
Storage Temperature
-20 ~ +70°C
Humidity
5% ~ 95% (Non-condensing)
Dimension
26 x 71 x 93 mm (HxWxD)
10G-Ethernet-Media-Converter-(with-3R-regeneration)

10G Ethernet Media Converter (with 3R regeneration) - LTX-MCSFP, LTX-MCXFP

LTX-MC series are complete and versatile solutions for the applications such as FTTx, CWDM, and carrier Ethernet. By the diversified speeds of 1,000Mbps and 10G, we provide standalone 10G MC products for different applications and can be applied according to your ideal network topology. LTX-MC series provide various interfaces such as UTP, SFP, SFP+, XFP and CX4. All these interfaces are developed to support the protocols such as, 10GBase-T, 10GBase-LR, 10GBase-SR, ER, ZR and 10GBase-CX4

  • Diversified interfaces including SFP, SFP+, RJ45, XFP and CX4
  • Supports 3R (Re-generation, Re-timing, Re-shaping) Performance
  • Supports Jumbo Frame
  • Supports D/D (Digital Detection) functioned optical transceivers and overload protection
  • 10G MC series support easy-to-use Management Webpage that allows users to view system status, counters, and network statistics
  • Supports SNMP (Simple Network Management Protocol)
  • Supports Link Loss Forwarding

Model LTX-MCSFP+2 LTX-MCSFP+XFP LTX-MCSFP+RJ45 LTX-MCSFP+CX4 LTX-MCXFP2 LTX-MCXFPRJ45
Interface ports
Port A
SFP+
SFP+
SFP+
SFP+
XFP
XFP
Port B
SFP+
XFP
RJ45
CX4
XFP
RJ45
Data rate
10
10G
Ethernet mode
10Base-SR
10Base-SR
10Base-SR
10Base-SR
10Base-SR
10Base-SR
10Base-LR
10Base-LR
10Base-LR
10Base-LR
10Base-LR
10Base-LR
10Base-T
10Base-CX4
10Base-T
Operating temperature
0°C ~ 40°C
Storage Temperature
0°C ~ 50°C
Humidity
0% ~ 85% RH
Dimension
147 mm x 89 mm x 28 mm
1000M-SFP-Gigabit-Ethernet-Media-Converter

1000M SFP Gigabit Ethernet Media Converter - LX-MC, LX-LS125, LX-LB125, LX-LCWS125, LX-MCR14

The Lightem Gigabit Media Converter is IEEE 802.3ab/z 1000Base-T compliant. It converts connects 10/100/1000Base-T unshielded twisted-pair devices (e.g. network bridges. switch or workstation cards) to choices of fiber optics interfaces via SFP slots. This solution offers a low-cost integration option for network managers who want to migrate from fast Ethernet Gigabit Ethernet. With its flexible SFP slot design, you can convert the copper twisted pair signal into Multimode, Singlemode, CWDM, BIDI (single fiber) fiber transmission by using various SFP modules.

 

  • Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab standards for TP connection and IEEE802.3z standards for Fiber connection
  • SFP Fiber port for flexible connection
  • 10/100/1000Base-T to 1000Base SFP Fiber Conversion
  • Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
  • Status LEDs for FX link, activity, PWR, TP link, activity, FDX Wide range of external power supply

Parameters Values
Optical Port
SFP
Duplex LC
Ethernet Port
RJ45 10/100/1000Base
Power Supply
External 5V DC power adaptor, 110 or 220V
Operating Temperature
-10 ~ +55°C
Weight
600g (complete package)
Dimension
72x94x28mm
LXM MC 01 min

1000M SFP Managed Gigabit Ethernet Media Converter (Built in IP based web management) - LXM-MC

Lightem 10/100M,10/100/1000M IEEE802.3ah OAM manageable ethernet fiber media converter can supervise the real time situation of remote manageable fiber media converter and set the functions. With this system, the response speed of the operator is quickened, the daily maintenance and network expenditure of the operators are reduced, and the serving quality of them is enhanced.

  • Built-in IP-based Web Interface
  • Supporting remote and local management
  • Supporling IEEEE 802.3X Frame Flow Control for Full-Duplex mode
    Store and Forward mechanism
  • Manual IP address setting/DHCP client for IP address assignment
  • SNMP v1 / v2c monitor / private Enterprise MIB
  • Event trap and SNMP trap support
  • Speed duplex mode configuration / Flow Control setting / bandwidth Control on TP / Fiber port
  • Supports Port Status / Ethernet Statistics on both TP and Fiber intertace
  • Supports Maximum frame size to 16K bytes
  • Loop detection / Broadcast / Multicast / Unicast storm control
  • Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN
  • 802.1p Tag Priority / IP address priority / IP DSCP option in
  • Quality of Service Mode and Strict Priority / Weighted Round Robin (WRR) QoS policies
  • TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
  • 16 TCP / UDP Filter groups
  • Password setting, IP setting and devices description setting through Planet Smart discovery utility
  • Firmware upgrade via remote Web interface
  • External DC 5V 2A power supply
  • LED indicators for easy network diagnosing
  • Reset Button at the front panel for the factory default reset
  • Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /1000Base-SX / LX mini GBIC module

Parameters Values
Ethernet Interface
Standards
IEEE802.3,IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x
Data rate
10Mbps, 100Mbps, 1000M half/full duplex auto-sensing
Connector
RJ-45 / UTP CAT5 or CAT5E connecting with RJ-45, transmission distance at 100m
Fiber port
Connector
ST, SC, FC.LC
Operating wavelength
850nm, 1310nm at Multi-mode; 1310nm,1550nm at single mode
Optical fibers
Multi-mode: 50/125,62.5/125 ; Single-mode: 9/125
Transmission distance
Dual fiber: up to 100km ; Single fiber: up to 80km
Basic working environment
Operating Temperature
0~65°C
Storage Temperature
-10~70°C
Humidity
5%~90%(non-condensing)
Dimension(standalone)
156mm(W)*128mm(D)*32mm(H)
Power supply
85VAC~265VAC or -40VDC~ -57VDC
Power consumption
≤5W
LF3 1FX M02 3 min

10/100M & 10/100/1000M Ethernet Media Converter – 2 RJ45 - LF3-1FX, LX3-1FX, LX3-1SFP

The Lightem L-MC series Media Converter are compact, cost-effective, low dissipative, industrial grade device for converting data signal between 10/100 Base-Tx and 100/1000 Base-Fx Ethernet bridging. The Media Converter is housed in a metal case, comes with external AC (110-220V) -DC (5V) power supply. The converter features LED diagnostics for FX, TP1 Act, TP1 FDX, TP2 Act, TP2 FDX, POWER. The product features 2 versions: 10/100M Fast Ethernet and 10/100/1000M Gigabit Ethernet. The powerful feature includes Auto Negotiation, Auto cross over for TP port, Voltage supervisor, and support switch mode & pure converter mode. Installation of the Fast Ethernet converter is simple and. Straightforward.

  • Available in 10/100M Fast & 10/100/1000M Gigabit Ethernet versions
  • Comply with IEEE 802.3, 802.3u, 802.3ab & 802.3z Fast / Gigabit Ethernet Standards
  • LED Indication: FX, TP1 Act, TP1 FDX, TP2 Act, TP2 FDX, POWER.
  • Provide 2x RJ-45 twisted pair Ethernet port and 1x Fx port
  • 10/100M & 10/100/1000M BASE-Tx port and full/half duplex auto-negotiation
  • Available wavelength 850nm, 1310nm, 1550nm
  • Optional LFP (Link Fault Pass Through) function
  • 19″ 2U Rackmount Chassis available

Parameters Values
Operating Standards
IEEE 802.3 10BaseT, IEEE 802.3u 100Base-TX, 100Base-FX, IEEE802.3ab 1000Base-Tx, IEEE802.3z 1000Base-X
Connector 
2x RJ45 & 1x FX (Duplex or Simplex SC)
LED Indication
FX, TP1 Act, TP1 FDX, TP2 Act, TP2 FDX, POWER.
Fiber Singlemode
9/125
Fiber Multimode
50/125, 62.5/125µm
Power supply
AV220V (175-260V), 50HZ or DC+5V 1A
Operating Temperature
0 ~ 55℃
Storage Temperature
-20 ~ 70℃
Humidity
5%-95% (non condensation)
Dimension
26 x 70 x 94mm
L-MC-series

L-MC series Fiber Optic 100M / 1G Ethernet Media Converter - LM0110, LS0110, LM1000, LS1000

The Lightem L-MC series Media Converter are compact, cost-effective, low dissipative, industrial grade device for converting data signal between 10/100/1000 Base-Tx and 100/1000 Base-Fx fast Ethernet bridging. The 10/100/1000M Media Converter is housed in a metal case, comes with external AC (110-220V) -DC (5V) power supply. The 100Base-TX and the 100Base-FX converter feature LED diagnostics for FX-100, FX-Link/Act,TX-100,TX-Link/ Act,FDX, PWR.

  • 1x  optical port and 1x RJ45 port
  • Comply with IEEE 802.3 & 802.3u Fast Ethernet Standards
  • LED Indication: FX-100,FX-Link/Act,TX-100,TX-Link/Act,FDX,PWR
  • Provide 1x RJ45 twisted pair 10/100M or 10/100/1000M Ethernet port and 1x 100 or 1000M (1G) FX port
  • 100/1000BASE-Tx port - 10M/100M/1000M and full/half duplex auto-negotiation
  • Available wavelength 850nm, 1310nm, 1550nm
  • Optional: Single Fiber (WDM Bi Directional)
  • Optional Control of LFP (Link Fault Pass), converter/switch mode flow control, FX speed (10/100/1000M)

Parameters Values
Operating Standards
EEE802.3u 100Base-TX and 100Base-FX
Connector 
UTP: RJ-45,10/100Mbp & 10/100/1000M
Fiber
100M or 1000M (1G) in Duplex or Simplex SC ( Optional: FC )
UTP Cable
UTP cable : Cat. 5 (the max distance up to 100m)
Fiber Singlemode
8/125, 8.7/125, 9/125, 10/125μm (the max distance up to 100km)
Fiber Multimode
50/125, 62.5/125μm (the max distance up to 2km)
Wavelength
Distance
Multimode 850nm
0-2km (100M), 0-500m (1000M)
Singlemode 1310nm
0-2km, 0-20km, 0-40km
Singlemode 1550nm
0-100km (100M), 0-60km & 0-100km (1000M)
Half / Full Duplex
IEEE802.3x flow control
Power
AC170 ~ 240V,DC5V 2A
DIP Option
Converter (9k) or Switch mode, Link Fault Pass through function, Flow control, Half / Full Duplex
Operating Temperature
0 ~ +55℃
Storage Temperature
-20 ~ 70℃
Humidity
5%-95%
Dimension Standalone
95x70x26mm
Dimensions (19” Chassis)
19″ 2U height
Copyright ©2021 Lightem Systems. All rights reserved

Site Map